宁波ayx爱游戏体育网页登录入口机器人科技有限公司

News Detail

Precautions for using slide module

Date: 2022-04-06

As a representative of automatic manipulator, slide module can be used in many occasions. However, not all places are suitable for the application of slide module. Today, Marcos will tell you about the use of Enteromorpha foot massage precautions.


1. Do not touch the conductive rubber, especially when inserting the backlight panel. (e.g. El backlight).


2. Do not tamper with any protruding part of the metal frame.


3. Avoid pressurizing the metal clamping part, otherwise the conductive rubber will deform and lose contact, resulting in pixel loss.


4. Do not punch or change the shape of PCB, do not move or modify components.


5. When installing the LCD module, make sure that the PCB is not subject to force such as twisting or bending force. The contact of conductive rubber is very precise, and slight dislocation on the original basis will cause pixel loss.


6. LCD is based on glass. Falling or colliding with hard objects will cause LCD to break or shatter. Especially at the corners.


7. Electrostatic: since the LCD module is equipped with CMOS circuit, the following measures must be taken to avoid static electricity.


8. When you use this LCD module in your product design, pay attention to the LCD perspective consistent with your product use.


9. LCD module is debugged and installed under high precision. Avoid the impact of external force, do not change or modify it.


10. Although the polarizer on the surface of the liquid crystal has a surface layer to suppress reflection, care should be taken not to scratch the surface. It is generally recommended to use a transparent plastic protective screen on the liquid crystal surface.


11. If the liquid crystal module is stored below the specified temperature, the liquid crystal material will condense and the performance will deteriorate. If the liquid crystal module is stored above the specified temperature, the molecular alignment direction of liquid crystal material will change into liquid state, and it may not be able to recover to the original state. Beyond the temperature and humidity range, the polarizer will peel off or blister. Therefore, the LCD module should be stored in the specified temperature range.


After telling, I believe you have a corresponding understanding, if you want to know more about relevant knowledge, we sincerely hope you can contact us, we will serve you wholeheartedly, and hope to bring you better help.

ayx爱游戏体育网页登录入口